PURMO ts14 S

The ts14S dry building system was developed for applications where conventional wet building systems with hot concrete or wet mortars cannot be used. The difference is, however, that the ts14S system must be covered with an additional layer of load sharing, such as a cement board. Direct installation of floors on the ts14S system plate is not permitted.

Underfloor heating construction with Purmo ts14S dry construction system

1. ts14S EPS 200 thermal insulation shaped plate, 25 mm
2. ts14S Omega shape heat dissipation sheets
3. Purmo SKR heating pipe 14x2 mm
4. 0.15 mm thick PE cover film
5. Cement board (eg Knauf Brio, Fermacell etc.)
6. Parquet

The ts14S system consists of EPS 200 quality expanded polystyrene plates. The heat dissipation sheets are inserted into them. The omega shape ensures that the SKR 14x2 mm multilayer heating pipes are held securely even with narrow installation distances. After laying the pipe, the system is covered with a thin PE film to avoid noise due to thermal expansion. Cement boards, e.g. Knauf Brio 18 or 23, as well as Fermacell (Xella) 2E22, and finally the floor.

Θερμομονωτική διαμορφωμένη πλάκα για σωλήνα SKR 14/2 mm. Διαμόρφωση για απόσταση σωλήνων 75,150,225 και 300mm. Ειδικό περίγραμμα για ασφαλή συγκράτηση του σωλήνα στα γυρίσματα. EPS 200, φορτία μέχρι 35kN/m²Θ